top of page
Multi-protection impregnation MSI02 - Sten Experts
The protection concentrate for many surfaces
Self-organizing non-stick components give a strong invisible repellent effect of liquids and dirt
Suitable for absorbent materials such as concrete stone, sandstone
Breathable multi-year protection
Product description
Breathable 2-phase impregnation concentrate for all types of porous or absorbent mineral substrates. Phase 1 works deep in the subsoil: the agent permanently bonds with the mineral components in the subsoil and provides substantial protection and reduces the absorption of liquids over a period of 6 - 8 years. Phase 2 acts as a beading effect on the surface: the strong beading effect ensures that liquids and dirt are repelled. This effect can be reduced by abrasion. The product is transparent and does not change the appearance of the substrate. Treated surfaces are neither slippery nor sticky. Dirt gets less into the pores and is easier to clean. The drying times after rain are drastically reduced and the breeding ground for algae, moss and lichen is removed.
Areas of application
Impregnation of all absorbent, porous surfaces
Ideal for terraces, facades, roof tiles, carports, concrete, paving stones and sandstone
Not suitable for dense and non-absorbent materials
Application
01
02
If required, dilute 1:9 to 1:10 with water and mix well.
03
Apply the product to the surface with a spray bottle/sprayer, alternatively with cotton strips or rollers. Connection surfaces do not have to be covered.
04
When applying, ensure that the agent is evenly distributed to avoid puddles and the sticky effect.
05
During the drying time of 4 to 8 hours, the surface must not be wet and must not be walked on.
Thoroughly clean the area to be treated beforehand and allow it to dry completely.
Available sizes
Size
Item number
EAN Code
Packaging
Bottle
1000ml
8210001
9120117732104
Questions & answers
The MSI02 Multi-protection impregnation can be used on marble. Be careful with polished surfaces. Always make a small sample in a place that is not easily visible.
Pets should be kept away from the treated area during treatment with the MSI02 Multi-protection impregnation. Once the cleaning is complete and the area is dry, there is no danger to your pets.
Dilute 1:9 to 1:10 with water as required and mix well. With a mixing ratio of 1:9, an area of approx. 40 to 60 m² can be protected.
The MSI02 Multi-protection impregnation is not dangerous for plants or lawns.
Notes & Safety instructions
Wear protective gloves/protective clothing/eye protection/face protection.
IF ON SKIN: Wash with plenty of water/soap. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if possible. Continue rinsing. Get medical advice/attention if you feel unwell. IF SWALLOWED: Rinse mouth thoroughly with water. Do not induce vomiting.
Keep out of the reach of children.
Read label and product information before use.
© 2023 Wimhof GmbH
bottom of page